About this items

• Pulverizing all kinds of dried materials, including grains, soy, corn, barley, rice, wheat, mung beans, coffee beans), spices (star anise, fennel, pepper, rosemary) ,herbs ,sesame, peanuts, walnuts. Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar to leave the space for blade’s turning when grinding.
• Overload protection, overload automatically power off, reset with a single touch, eliminating the need to replace the fuse. 1000g large-capacity design, a practical choice for family members, friends and elders, family / hospital / pharmacy / grain mill / scientific research unit.
• Stainless steel material, wear-resistant and durable, the top bulge design, during the crushing process, the material will fall back when it touches the bulge. Multi-directional grinding, 270 ° swing, free adjustment, fast grinding speed make powder in 30 SECONDS, no need to move the machine when pouring powder.
• About sparks and smoke, it is a normal phenomenon,Due to brush motor, some sparks and brush frictional odor is normal when the first several uses, Please don’t worry and cut off the power.
• Check whether the carbon brushes are loosing ans Please Tighten the carbon brushes on both sides or Reducing the amount of grinding powder then try to start the grinder.The machine has overload protection and will automatically disconnect the power.please feel free to use.
• The high speed swing grinding machine is a necessary tool to ram the medicine, it is 50 times stronger than the traditional motor in working efficiency.
• This machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc), usually smash the medicine into the powder for no more than a minute.
• This machine is suitable for dispensary, medicine processing.

Operations Guide

• Turn off the power switch before using the device.
• Open the top cover. (Tighten clockwise, open counterclockwise).
• Put the dry material into the shredding container. (Best amount of material for 2/3rds,The smashing material should keep dry, Not suitable for wet, fresh, oily or sticky materials.)
• Close the top cover tightly,completely tighten the two bolts on the lid.
• Plug in and turn on the switch for grinding (Do not continuously operate the machine, and it takes 5 minutes to rest after every 1 minutes of grinding work.)
• Turn off the switch, (When you hear the sound rolling evenly, the material has been grinded into powder)

Special Attention:

• To avoid sparks and smoke caused by overloading the machine during operation:
• Recommended that the grinding material should not exceed two-thirds of the container,never fill the container.
• Recommended that the working time should not exceed 1 minutes.